Aimpoint 3XMag with TwistMount. Aimpoint 3XMag with TwistMount.
Aimpoint 3XMag with TwistMount. Aimpoint 3XMag with TwistMount.

Aimpoint 3XMag with TwistMount.


The Aimpoint 3XMag for long-range aiming or observation.

Out of stock
Brand: Aimpoint
Article number: AP 11328
Availability: Out of stock


The Aimpoint 3XMag magnifying module is specially designed for compatibility with Aimpoint sights and for maximum flexibility and better performance in the field.

The Aimpoint 3XMag magnifying module is a high quality optic that can be used with any Aimpoint sight for extended range target identification and engagement. This high quality accessory gives the shooter the best of both worlds: rapid CQB aiming with an Aimpoint sight, and long range target acquisition in combination with the magnifier. The Aimpoint TwistMount allows this transition to occur effortlessly and in just a matter of seconds.

Mechanical Interface

The recommended mount for the 3XMag is the Aimpoint TwistMount, which allows for quick attachment on any MIL-Std 1913 Picatinny Rail. Check if you need a spacer for co-witnessing with the Aimpoint sight.

The 3XMag can also be attached to aftermarket “flip to side” mounts.

Unique features

  •     Mountable on a rail system behind Aimpoint sights
  •     Extremely fast and ingenious mounting solution (Twist Mount - Picatinny)
  •     Can also be mounted with a regular 30 mm ring
  •     Provides extended range to the operator
  •     Combines the best of two worlds – CQB & semi-sniping
  •     Increases confidence, performance, and flexibility
  •     No influence on point of impact – No need for re-zeroing the sight
  •     Doubles as handheld magnifying glass monocular.

Technical Specifications
General Specifications
Art.No: 11328
Optical Specifications
Operating principle: Magnifying device
Optical magnification: 3x
Aiming dot size: Uses the reticle of the combining sight
NVD compatible: Yes
Optical coating: Anti-reflex, all surfaces and multi-layer. NVD-Compatible 1, 2, 3
Clear aperture: 20 mm
Eye relief: 60-65 mm at full FOV (40-90 mm at 5° FOV)
Transmission: >60% (700–1000 nm)
Resolution: >12 (lp/mrad)
Dioptric adjustment: Fixed -1.0 D
Power Source
Battery type: No power required
Physical Specifications
Length sight only: 110 mm (4 5/16")
Length conf: 110 mm (4 5/16")
Width: 44 mm (1 3/4")
Height sight only: 41 mm (1 5/8")
Weight sight only (incl battery): 200 g (7,1 oz) including rubber cover
Housing material: High Strength Aluminum
Housing finish and color: Matte black
Material mount and spacer std conf: High Strength Aluminum
Surface treatment: Hard anodized, matte, with protective rubber armor cover
Height of optical axis - sight and mount: 30 mm (1 3/16") over top surface of Picatinny/Weaver Rail
Height of optical axis - sight, mount and low spacer: 39 mm (1 9/16") over top surface of Picatinny/Weaver Rail
Environmental Specifications
Temperature range operation: -45°C to 71°C (-49°F to 160°F)
Temperature range storage: -51°C to 71°C (-60°F to 160°F)
Temperature shock: Operable after a temperature shock between -45°C and +71°C. Duration: 4h of Hot +71°C, 4h of Cold -45°C. Cycling: 3 times
Humidity: Operates despite humidity. Limits: RH: 95%, Temp: 20ºC to 50 ºC, cyclic
Immersion, static: Operates after immersion. Limits: Depth: 1 m (3 ft.)
Shock: Operable before and after shock. Limits: X-axis: 500 g, 0.7 – 1.1 ms (3 shocks), Y-axis: 40g ±4g, 11 ±1ms (2 shocks in each direction, Z-axis: 40g ±4g, 11 ±1ms, 2 shocks in each direction. Functional during exposure (room temperature)
Vibration: Operates despite vibration. Limits: Vibration, sinusoidal in a frequency range of 10-150 Hz. Frequency: 10-30 Hz, ±1.587 mm, Frequency: 30-150 Hz. 5.75 g, 1 octave/min
Chemical resistance: Withstands occasional contamination of: Hydraulic oil (FSD 8407, Tryckolja 021), Lubricating oil (FSD 8127, Motorolja 5W/30), Lubricating oil (FSD 8220, Smörjfett 220), Lubricating oil (Break Free), Fuels (FSD 8612, Diesel fuel oil), Solvents/cleaning (FSD

0 stars based on 0 reviews
Add to wishlist / Add to compare
Copyright 2022 - Powered by Lightspeed
Bank transfer iDEAL Bancontact / Mister Cash Giropay